Ekomex WW-130N–WW-300 Automatic Angle Grinders

The automatic angle grinder WW-130N is a universal machine for medium and large meat plants for grinding, grinding, cutting into a specific structure of fresh, chilled and frozen meat. It also works well with other food raw materials in poultry, pet food, fish, delicatessen and cheese plants.

Features of automatic angle grinder WW-130N

Appropriate construction of the hopper, housing, angular positioning of the screws (feeding and working), their appropriate construction, speed adjustment and speed difference provide even flow of the raw material and good compression on the cutting tools, what provides the proper structure of the cutting.

PLC control in the automatic angle grinder WW-130N

PLC control enables motor load control, clear operation, current adjustment, programming, archiving and saving of program parameters on the touch panel.

Technical data

Features of Ekomex grinders:

• Robust, massive, smoothly polished construction made of stainless steel EN 1.4301.

• Hygienic and ergonomic design provides easy operation, cleaning and maintenance.

• High quality components

Additional equipment:

• Column loading device for 200 l bins or type ZM-600 for big-box containers

• VERTICUT system – horizontal knife shaft for initial grinding of frozen blocks to -8 ° C, installed in the hopper.

• VERTIMIX system – horizontal paddle or Z-type mixing shaft – placed above the feeding screw, which works in the REVERSE mode during the PREMIX cycle. These systems have been developed to increase the range of operation of the machine as well as to improve the uniformity of the feeding the raw material towards the feeding screw.

• SINGRISET separating head (S2000 model)

• Individual unloading height

• Smooth adjustment of the screws speeds

The automatic angle grinder is available in the version pre-prepared for the Singriset separating head, which is the original, patented system for extruding meat raw materials with automatic adjustment of the separation pressure.

Features of automatic angle grinder with separating head WW-160

Such a configured machine becomes a universal and effective low- and high-pressure separator, largely eliminating harder fractions such as: tendons, cartilages, gristles, , bones, hard fat, veins, during the process of grinding meat into a structure from 2 to 7 mm.

When grinding fresh, slightly frozen meat, hard cheeses, the Singriset system can replace the traditional cutting sets based on knives and hole plates.

In terms of the diameter of the sleeve holes 2 ÷ 4/3 ÷ 5/5 ÷ 7 mm, it additionally enables:
– separation of poultry bones (chicken, turkey),
– hole separation of cartilages, pork and beef skins,
– grinding and cleaning cooked meat (culinary meat).

Appropriate construction of the hopper, housing, angular positioning of the screws (feeding and working), their appropriate construction, speed adjustment and speed difference provide even flow of the raw material and good compression on the cutting tools, what provides the proper structure of the cutting.

PLC control in automatic angle grinder

PLC control enables motor load control, clear operation, current adjustment, programming, archiving and saving of program parameters on the touch panel.

Technical data

Features of Ekomex grinders:

• Robust, massive, smoothly polished construction made of stainless steel EN 1.4301.

• Hygienic and ergonomic design provides easy operation, cleaning and maintenance.

• High quality components

Additional equipment:

• Smooth adjustment of the screws speeds

• VERTICUT system – horizontal knife shaft for initial grinding of frozen blocks to -10 ° C, installed in the hopper.

• VERTIMIX system – horizontal paddle or Z-type mixing shaft – placed above the feeding screw, which works in the REVERSE mode during the PREMIX cycle. These systems have been developed to increase the range of operation of the machine as well as to improve the uniformity of the feeding the raw material towards the feeding screw.

• Column loading ZM200 for 200 l bins or type ZM-600 for BIGBOX containers

• Individual unloading height

• Control panel on the arm

Automatic angle grinder WW-200 is universal, industrial machine for small, medium and large food processing plants for grinding, mincing, cutting into specified structure meat raw materials, fresh, chilled or frozen, depending on the machine model.

It also works well with other food raw materials in poultry, pet food and fish processing as well as during production of delicatessen, cheese and convenience food.

Features of automatic angle grinder WW-200

Appropriate construction of hopper, throat and screw housing as well as speed control ensure even flow of raw material and good compression in cutting tools, which provides proper structure of grinding.

PLC control in the automatic angle grinder WW-200

PLC control enables motor load control, clear operation, current adjustment, programming, archiving and saving of program parameters on the touch panel.

Technical data

Features of Ekomex grinders:

• Robust, massive, smoothly polished construction made of stainless steel EN 1.4301.

• Hygienic and ergonomic design provides easy operation, cleaning and maintenance.

• High quality components

Additional equipment:

• SINGRISET separating head (S7000 model)

• Smooth adjustment of the screws speeds

• Block pre-breaking shaft VERTICUT Series

• Z-arm or paddle mixing shaft, VERTIMIX series

• Column loader ZM-200 for 200 l bins or ZM-600 for BIGBOX containers

• Individual discharge height

• Singriset head

Automatic angle grinder WW-280 is universal, industrial machine for small, medium and large food processing plants for grinding, mincing, cutting into specified structure meat raw materials, fresh, chilled or frozen, depending on the machine model.

It also works well with other food raw materials in poultry, pet food and fish processing as well as during production of delicatessen, cheese and convenience food.

Features of automatic angle grinder WW-280

Appropriate construction of hopper, throat and screw housing as well as speed control ensure even flow of raw material and good compression in cutting tools, which provides proper structure of grinding.

PLC control in the automatic angle grinder WW-280

PLC control enables motor load control, clear operation, current adjustment, programming, archiving and saving of program parameters on the touch panel.

Technical data

Features of Ekomex grinders:

• Robust, massive, smoothly polished construction made of stainless steel EN 1.4301.

• Hygienic and ergonomic design provides easy operation, cleaning and maintenance.

• High quality components

Additional equipment:

• Smooth adjustment of the screws speeds

• Block pre-breaker VERTICUT Series

• Z-arm or paddle mixing shaft VERTIMIX series

• Column loader ZM-200 for 200 l carts or ZM-600 for BIGBOX container

• Individually adapted discharge height of the machine

The WW-300 automatic angle grinder for frozen blocks is an universal industrial machine for small, medium and large food establishments for grinding, milling, cutting into a specific structure of frozen meat raw materials.

It also works well for other food raw materials in poultry, pet food, fish, delicatessen, cheese and ready meal plants.

Angle grinder for frozen blocks WW-300 – features

Sets of screws for frozen raw materials

The angular arrangement of screws allows smooth flow of raw material, and the special design is adapted for cutting blocks in the hopper.

Cutting sets for frozen raw materials 

WX300 type cutting tools (jerks, knives, screens, distance rings) available in various 2, 3, 4 or 5-part configurations.

PLC control in the automatic angle grinder for frozen blocks WW-300

PLC control enables motor load control, clear operation, current adjustment, programming, archiving and saving of program parameters on the touch panel.

Technical data

Features of Ekomex grinders:

• Robust, massive, smoothly polished construction made of stainless steel EN 1.4301.

• Hygienic and ergonomic design provides easy operation, cleaning and maintenance.

• High quality components

Additional equipment:

• Smooth adjustment of the screws speeds

• Column loading device ZM-200 for 200 l bins or type ZM-600 for BIGBOX containers

• Individually adapted discharge height of the machine

• Block loading transporter

• Tool blocking system

• Opened zone passing and compressing raw material with screw bearing cover

• Integrated crane and set of carts for handling screws